Epulse Global Slimming Belt is a high-performance belt that uses an unique oscillating massage movement, simulating traditional chiropractic massage therapy, to deliver an effective integrated toning treatment for these and other parts of the body. It is the perfect complement for today's hectic lifestyle.

• Helps detach fats which are removed via the lymphatic system.
• Digestion-Oscillates with the movement of the transverse colon system. Promotes good digestive system, improves absorption of nutrients, better circulation and better complexion.
• Provide heat around the area of body contact with the belt, with temperature range from 31 ^oC to 60 ^oC, which can help the blood circulation.
• Sports massage- Provides toning and treatment to the major muscle groups to prevent injury and prolong sports life.
• Physiotherapy- Simulates traditional chiropractic therapy massages for a more effective physiotherapy.

WARNING

• For pregnant women do not use the unit.
• Who need doctor’s special cautions, act upon the doctor’s instruction before using the product
• Stop immediately using the unit if unusual symptoms are happened when in use
• Make sure to pull out the plug from the power outlet when in no use.
• Do not dismantle, repair or modify the unit.
• Do not use with wet hands to connect or disconnect the plug from the power outlet.
• Do not use a damaged power cord/plug or a defective socket.
• Do not use the unit in a high temperature & high humidity environment.

Function of the button on the controller

• “Power”: control the unit Switch on or off.
• “Mode”: shift control between Auto Mode and Manual Mode.
• “High”: make strength of vibration higher from Level 1 to Level 5.
• “Low”: make strength of vibration lower from Level 5 to Level 1.
• “Heat”: additional function with thermal release.

How does it work?

1. Wrap the belt firmly to your body and adjust the size by the Velcro fastener.
2. Put the adaptor jack of the adaptor to the Power connector Jack of the belt.
3. Plug in the power adaptor to the wall socket. (Make sure that the input voltage of the wall socket adaptor is suitable for the supplied adaptor.)
4. Once the power has been connected, a power indicating light will be light up in orange color. That means the product is under the standby mode of auto mode.
5. If you only wants to run the heat treatment, press HEAT button, then the unit will release the heat power from 31 ^oC – 60 ^oC, the temperature will be change every minute. And this mode also with 10 minutes auto off function.
6. To run the vibration massage, turn on the unit by pressing the Power button once, then the belt start working at auto mode, or you can press the mode button to adjust to manual mode.

   

   Auto mode (indicating light in GREEN color)

   In this mode the belt will be run from level 2 and automatically run a cycle, user also can press the high or low button to adjust the starting level. Maximum level is 5 and Minimum level is 1

   1 ---> 2 ---> 3 ---> 4 ---> 5

   Manual mode (indicating light in RED color)

   • Level Up (press high button) 1 2 ---> 3 ---> 4 ---> 5
   • Level Down (press low button) 1 <--- 2 <--- 3 <--- 4 <--- 5
   
   
7. When press high or low button, a Beep sound will be heard and it means the level had been adjusted, if no sound means it’s already been limit.
8. To change the mode, you can press the mode button anytime to change the mode.
9. A safe protection - Prevention of overheat, the belt designed with 2 ventilating eyelet on the top of the belt.
10. The belt presetted with auto timer, the massager will be start count down from 10 minutes and which will be auto stop after 10 minutes treatment.
11. Or user can stop the massager anytime by pressing the “Power” button.

PRECAUTION

• While using, the adaptor and the belt will be heat, which is normal.
• When not in use, make sure to plug out the adaptor from the electricity socket.
• Keep out of reach by children.
• For storage, always keep the unit in a storage bag which provided.
• Do not store the unit in a sunny place or a damp place for long time.
• Do not put heavy articles on the unit.
• For cleaning the belt , let the belt cool down and clean the dust with a dry cloth.

Important instructions. Retain for future use.

• Do not insert pins.
• Please kindly note that the power for this Epulse Global massage belt only to be used with the AC adaptor here supplied.
• Appliance provided with detachable transformers appliance is only to be used with the types that are marked on the appliance.
• Examine the appliance frequently for signs of wear or damage. If there are such signs or if the appliance has been misused, return it to the supplier prior to any further use.

Caution:

• Auto mode (automatically run a cycle from level 1 to level 5).
• A manual mode (available from level 1 to level 5 for selection).
• 5 levels of each mode.
• Heat function available from 31 ^oC – 60 ^oC.
• 10 minutes auto off function.